Screws
Nails
Fasteners & Fixings
Adhesives & Building Chemicals
Powertool Accessories
Fence & Gate Hardware
Building Supplies
Security & Ironmongery
Site and Access
Hand Tools
Painting & Decorating
Workwear, PPE & Safety
FirmaHold Angled Brad Nails Without Gas
16 gauge 20° angled brads in galvanised and A2 stainless steel for compatible second fix nailers, supplied without fuel cells.
Timco FirmaHold Collated Brad Nails – 16g x 32mm – 16 Gauge – Angled – Galvanised
In stock
£4.08 ex VAT(£4.89 inc VAT)
SKU:
ABG1632
Timco FirmaHold Collated Brad Nails – 16g x 38mm – 16 Gauge – Angled – Galvanised
In stock
£4.58 ex VAT(£5.49 inc VAT)
SKU:
ABG1638
Timco FirmaHold Collated Brad Nails – 16g x 50mm – 16 Gauge – Angled – Galvanised
In stock
£5.58 ex VAT(£6.69 inc VAT)
SKU:
ABG1650
Timco FirmaHold Collated Brad Nails – 16g x 45mm – 16 Gauge – Angled – Galvanised
In stock
£4.99 ex VAT(£5.99 inc VAT)
SKU:
ABG1645
Timco FirmaHold Collated Brad Nails – 16g x 64mm – 16 Gauge – Angled – Galvanised
In stock
£6.41 ex VAT(£7.69 inc VAT)
SKU:
ABG1664
Timco FirmaHold Collated Brad Nails – 16g x 38mm – 16 Gauge – Angled – A2 Stainless Steel
In stock
£21.74 ex VAT(£26.09 inc VAT)
SKU:
ABSS1638
Timco FirmaHold Collated Brad Nails – 16g x 64mm – 16 Gauge – Angled – A2 Stainless Steel
In stock
£37.49 ex VAT(£44.99 inc VAT)
SKU:
ABSS1664
Timco FirmaHold Collated Brad Nails – 16g x 50mm – 16 Gauge – Angled – A2 Stainless Steel
In stock
£28.49 ex VAT(£34.19 inc VAT)
SKU:
ABSS1650
About FirmaHold Angled Brad Nails Without Gas
FirmaHold angled brad nails without gas provide nails-only packs for second fix work such as fitting skirting boards, architraves, trims and tongue-and-groove panelling. These 16 gauge brads feature 20° angled collation for use with compatible angled nailers.
The T head provides a discreet, concealed fixing for a neat finish. In addition, the shank design offers low penetration resistance, helping the nails drive easily into the material.
Angled Brads Without Gas at a Glance
- 16 gauge brads with 20° angled collation
- Galvanised and A2 stainless steel options
- T head for a discreet, concealed fixing
- Nails only – no fuel cells included
- For compatible gas-powered, battery-powered and pneumatic angled nailers
- Check individual listings for nail sizes and pack quantities
Which Nail Guns Take These Brads?
Timco’s compatibility guide lists the Paslode IM65A, DeWalt DCN660 and Milwaukee M18 FN16GA for FirmaHold 16 gauge 20° angled brads. The DeWalt and Milwaukee models are battery-powered, while the Paslode IM65A requires a compatible finishing fuel cell purchased separately.
Check your exact model in our FirmaHold angled brad nail gun compatibility table before ordering. Your tool must accept the selected nail length as well as the correct gauge and collation.
Straight and angled brads are not interchangeable. These nails require a tool that accepts 16 gauge 20° angled brads. They are not suitable for straight brad nailers or 15 gauge angled nailers.
Choosing Galvanised or Stainless Steel Brads
Choose the nail material according to the timber and installation environment. Then select a length that provides sufficient penetration for the fixing and falls within your nailer’s supported range.
| Material / Finish | Selection Guidance |
|---|---|
| Galvanised | For dry internal second fix applications, including skirting, architraves and panelling. |
| A2 Stainless Steel | For suitable internal, external and hardwood applications requiring stainless steel corrosion resistance. |
Stainless steel is important where the timber has inherently corrosive characteristics, such as green oak. For coastal or highly corrosive conditions, confirm the required material grade against the project specification.
Choosing Your Angled Brad Nail Pack
- Tool compatibility – Confirm that your nailer accepts 16 gauge 20° angled brads.
- Nail length – Match the fixing requirements and your tool’s accepted length range.
- Material – Choose galvanised or A2 stainless steel to suit the application.
- Fuel requirements – Gas-powered nailers require suitable finishing fuel cells purchased separately.
- Pack contents – Confirm the nail quantity supplied in the listing.
When Should You Choose Nails Without Gas?
FirmaHold angled brad nails without gas are a practical choice for compatible battery-powered and pneumatic nailers, which do not require fuel cells. They also suit compatible gas-powered nailers when you already have suitable fuel available.
If you need gas separately, browse our FirmaHold finishing nailer fuel cells. Alternatively, explore our angled brad nails with gas for packs containing both nails and fuel cells.
Need Help Checking Compatibility?
Read our complete FirmaHold nail gun compatibility guide for second fix model tables, nail specifications and fuel cell information. To compare other gauges and collation types, browse the full FirmaHold second fix brad nails range.
